Filter
Top Products
7
En
Installation and Connections
English
Installation and Connections
Input Connectors on the Plasma
Display with Video Card
Consult the following chart when making connections to
a plasma display equipped with this video card (pages 7
to 12).
*1 Although INPUT1/INPUT2 are compatible with various kinds
of signals, setup using the on-screen menu is necessary after
connections are made in order match the characteristics of
the source component (pages 14 and 15).
*2 INPUT1 is compatible with Microsoft’s Plug & Play (VESA
DDC 1/2B).
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
*4 INPUT5 is compatible with Microsoft’s Plug & Play (VESA
DDC 2B).
Connection to INPUT1 and INPUT2
Various components can be connected to the INPUT1 and
INPUT2 jacks. After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component. Please see pages 14 and 15 for
on-screen setup after connection.
: Do not connect anything. : Connect to this jack.
Note
Components compatible with INPUT1 are also compatible with
INPUT2.
When making connections to INPUT1, please refer to the plasma
display’s Operating Instructions.
For the screen sizes and input signals that INPUT1
and INPUT2 are compatible with, please refer to
the plasma display’s Operating Instructions.
INPUT2
jack
Output source
[ON SYNC]
GBR
[H/V SYNC]
HD VD
Video component/
personal
computer (PC)
with RGB output
G ON SYNC
R
RG
GBR
B
B
VD
H/V SYNC
HD
Input
Connector
INPUT
1
*1
INPUT
2
*1
INPUT
4
INPUT
3
Analog RGB
Component video
S video
Composite video
Personal computer
(PC)
AV component
Connected
component
and signals
INPUT
5
Analog RGB
S video
Composite video
Digital RGB
*2
*3
*3
*4
Video component
with component
video output
YCB/PB CR/PR