Filter
Top Products
A-20 SV61027 Rev. D
Appendix A • Control Panel Menus
To use this option to direct the printer to Load or Save the
Job Setting as a certain number:
1. Press the + or – buttons to scroll through the Main Menu
options until the Job Settings option appears on the LCD
panel.
2. Press the Enter button to select this option.
3. Press the + or – buttons to select A. Load or B. Save.
4. Press the Enter button to select the desired option.
5. After you’ve made your selection, press the Menu button
several times to back out of the menu, until the printer
displays OFF LINE. Then, press the ON LINE button to
enable the printer.
NOTE: If your printer is attached to a computer, use this
menu to configure your printer so it is compatible with your
computer’s setup.
7. Job Settings
(continued)