Filter
Top Products
A-8 SV61027 Rev. D
Appendix A • Control Panel Menus
1. Address
Layout
(continued)
B. Distance to Bottom (Bottom Margin)
Use this option to set the distance from the top address line
to the bottom of the envelope. For #10 envelopes this should
be about two inches.
Press the + or – buttons to increase or decrease the Dis-
tance to Bottom, (+ MORE or – LESS) defined in inches or
millimeters. The bottom margin is the distance between the
bottom edge of the material and base of first line of the ad-
dress.
Minimum distance between the last line of the address and
the bottom edge of the material is 5/8”. If less than 5/8”, the
lower right barcode will not be printed.
Press the Enter button to enable the desired measurement.