Filter
Top Products
ADW-4302v2 User Guide
Figure 90: Routing Screen
Data - Routing Screen
RIP
RIP Direction
Select the desired RIP Direction.
RIP Version
Choose the RIP Version for the Server.
Static Routing
Static Routing
Table Entries
This list shows all entries in the Routing Table.
• This area shows details of the selected item in the list.
• Change any the properties as required, then click the
"Edit" button to save the changes to the selected entry.
Buttons
Add
Add a new entry to the Static Routing table, using the data
shown in the "Properties" area on screen. The entry selected
in the list is ignored, and has no effect.
Edit
Update the current Static Routing Table entry, using the data
shown in the table area on screen.
Delete
Delete the current Static Routing Table entry.
Save
Save the RIP setting. This has no effect on the Static Routing
Table.
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to the
ADW-4302v2, so that they can be forwarded to the external LAN, WAN, or Internet.
To achieve this, the local LAN must be configured to use the ADW-4302v2 as the
Default Route or Default Gateway.
Local Router
The local router is the Router installed on the same LAN segment as the ADW-4302v2.
This router requires that the Default Route is the ADW-4302v2 itself. Typically, routers
have a special entry for the Default Route. It should be configured as follows.
112