Filter
Top Products
ADW-4302v2 User Guide
Checking TCP/IP Settings - Windows 9x/ME:
5. Select Control Panel - Network. You should see a screen like the following:
Figure 14: Network Configuration
6. Select the TCP/IP protocol for your network card.
7. Click on the Properties button. You should then see a screen like the following.
Figure 15: IP Address (Win 95)
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting. Using this is recommended. By default, the ADW-4302v2
will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the ADW-4302v2.
Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making
the following changes:
26