ADW-4302v2 User Guide
• Check the ADW-4302v2's status screen to see if it is working
correctly.
Problem 2: Some applications do not run properly when using the ADW-
4302v2.
Solution 2:
The ADW-4302v2 processes the data passing through it, so it is not
transparent.
For incoming connections, you must use the Virtual Server or Fire-
wall Rules to specify the PC which will receive the incoming traffic.
You can also use the DMZ function. This should work with almost
every application, but:
• It is a security risk, since the firewall is disabled.
• Only one (1) PC can use this feature.
Wireless Access
Problem 1: My PC can't locate the Wireless Access Point.
Solution 1:
Check the following.
• Your PC is set to Infrastructure Mode. (Access Points are always
in Infrastructure Mode)
• The SSID on your PC and the Wireless Access Point are the
same.
Remember that the SSID is case-sensitive. So, for example
"Workgroup" does NOT match "workgroup".
• Both your PC and the ADW-4302v2 must have the same setting
for WEP. The default setting for the ADW-4302v2 is disabled, so
your wireless station should also have WEP disabled.
• If WEP is enabled on the ADW-4302v2, your PC must have WEP
enabled, and the key must match.
• If the ADW-4302v2's Wireless screen is set to Allow Trusted PCs
only, then each of your Wireless stations must have been desig-
nated as "Trusted", or the Wireless station will be blocked.
• To see if radio interference is causing a problem, see if connec-
tion is possible when close to the ADW-4302v2.
Remember that the connection range can be as little as 100 feet
in poor environments.
Problem 2: Wireless connection speed is very slow.
Solution 2:
The wireless system will connect at the highest possible speed,
depending on the distance and the environment. To obtain the high-
est possible connection speed, you can experiment with the
following:
• ADW-4302v2 location.
Try adjusting the location and orientation of the ADW-4302v2.
• Wireless Channel
If interference is the problem, changing to another channel may
show a marked improvement.
• Radio Interference
Other devices may be causing interference. You can experiment
by switching other devices Off, and see if this helps. Any "noisy"
122