Filter
Top Products
Operation and Status
VC 1 Status
VC 2 Status
VC 3 Status
VC 4 Status
For each VC (Virtual Circuit), the current status is dis-
played. This will be either "Enabled" or "Disabled".
Note: VC 1 is a standard (Routed) Internet connection. VC
2, VC 3 and VC 4 are Bridge-mode connections.
Internet (VC1)
Connection Method
Displays the current connection method, as set in the Setup
Wizard.
Connection Status
This indicates the current status of the Internet Connection
• Active - Connection exists
• Idle - No current connection, but no error has been
detected. This condition normally arises when an idle
connection is automatically terminated.
• Failed - The connection was terminated abnormally.
This could be caused by Modem failure, or the loss of
the connection to the ISP's server.
If there is an error, you can click the "Connection Details"
button to find out more information.
Internet IP Address
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
LAN
IP Address
The IP Address of the ADW-4302v2.
Network Mask
The Network Mask (Subnet Mask) for the IP Address
above.
DHCP Server
This shows the status of the DHCP Server function. The
value will be "Enabled" or "Disabled".
MAC Address
This shows the MAC Address for the ADW-4302v2, as
seen on the LAN interface.
Wireless
Name (SSID)
If using an ESS (Extended Service Set, with multiple ac-
cess points) this ID is called an ESSID (Extended Service
Set Identifier).
Region
The current region, as set on the Wireless screen.
Channel
This shows the Channel currently used, as set on the
Wireless screen.
Wireless AP
This indicates whether or not the Wireless Access Point
feature is enabled.
Broadcast Name
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
System
Device Name
The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
49