Filter
Top Products
PC Configuration
Figure 19: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or
Specify an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the
ADW-4302v2 will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the ADW-4302v2.
Specify an IP Address
If your PC is already configured, check with your network administrator before making
the following changes.
1. The Default Gateway must be set to the IP address of the ADW-4302v2. To set
this:
• Click the Advanced button on the screen above.
• On the following screen, click the Add button in the Gateways panel, and enter the
ADW-4302v2's IP address, as shown in Figure 20 below.
• If necessary, use the Up button to make the ADW-4302v2 the first entry in the
Gateways list.
29