Filter
Top Products
40
Warning: the initial IP configuration is usually done directly at the host system
using the initial configuration procedure. Changing the network settings of the
IKVM-1000 might result in losing connection to it. In case you change the
settings remotely, make sure that all the values are correct and you still have an
option to access the IKVM-1000.
IP auto configuration
With this option you can control if the IKVM-1000 should fetch its
network settings from a DHCP or BOOTP server. For DHCP, select
“dhcp” , and for BOOTP select “bootp” accordingly. If you choose
“none” then IP auto configuration is disabled.
IP address
IP address in the usual dot notation.
Subnet Mask
The net mask of the local network.
Gateway IP address