Filter
Top Products
43
The administrator has to register an IKVM-1000 that is supposed to take part in the
service with the Dynamic DNS Server and assign a certain hostname to it. He will
get a nickname and a password in return to the registration process. This account
information together with the hostname is needed in order to determine the IP
address of the registered IKVM-1000.
You have to perform the following steps in order to enable Dynamic DNS:
• Make sure that the LAN interface of the IKVM-1000 is properly configured.
• Enable Dynamic DNS and change the settings according to your needs.
Enable Dynamic DNS
This enables the Dynamic DNS service. This requires a configured
DNS server IP address.
Dynamic DNS server
This is the server name where IKVM-1000 registers itself in regular
intervals. Currently, this is a fixed setting since only dyndns.org is
supported for now.
Hostname
This is the hostname of the IKVM-1000 that is provided by the
Dynamic DNS Server. ( use the whole name including the domain,
e.g. testserver.dyndns.org , not just the actual hostname).
Username
You have registered this username during your manual registration
with the Dynamic DNS Server. Spaces are not allowed in the
Nickname.
Password
You have used this password during your manual registration with
the Dynamic DNS Server.
Check time
The IKVM-1000 card registers itself in the Dynamic DNS server at
this time.
Check interval