Filter
Top Products
41
In case the IKVM-1000 should be accessible from networks other
than the local one, this IP address must be set to the local network
router's IP address.
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation.
This option may be left empty, however the IKVM-1000 will not be
able to perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It
will be used in case the Primary DNS Server cannot be contacted.
Remote Console And HTTPS port
Port number at which the IKVM-1000's Remote Console server and
HTTPS server are listening. If left empty the default value will be
used.
HTTP port
Port number at which the IKVM-1000's HTTP server is listening. If
left empty the default value will be used.
Telnet port
Port number at which the IKVM-1000's Telnet server is listening. If
left empty the default value will be used.
Bandwidth limitation
The maximum network traffic generated through the IKVM-1000
ethernet device. Value in Kbit/s.
Enable Telnet access
Set this option to allow accessing the IKVM-1000 using the Telnet
protocol.
Disable Setup Protocol
Enable this option to exclude the IKVM-1000 from the setup
protocol.