Filter
Top Products
.
Figure 4-22. SNMP settings
Enable
Enable/Disable the SNMP service, default setting is Disable.
(Support SNMP version 1 or SNMP version 2c).
SNMP Read Community
SNMP Read Community string so that EPICenter can
retrieve information.(default :public)
SNMP Write Community
Specifies the name of the SNMP write community to which
the printer device that this actual destination represents
belongs.(Default:private)
SNMP Trap Host
Defines an SNMP trap host to which AppCelera will send
trap messages. (Default address is empty)
SNMP Trap Community
The SNMP trap community name. The community name
functions as a password for sending trap notifications to the
target SNMP manager. (Default: public).
Table 4-15. SNMP description
56