Filter
Top Products
- 13 -
Main menu Submenu Function
1. Topology Information
Show the Device ID, Hardware version,
Boot-up version, POST version, runtime
code version, agent status, device name
and device location of each switch on the
stack.
2. System Information
Show detail system information of each
switch including their hardware, software
version, system up time, system contact,
device name, device location and system
management capabilities.
1. System
Information
3. System Configuration
Modify system contact, device name and
device location of each switch on the
stack.
1. Network
Configuration
Configure each switch’s IP address,
subnet mask and default gateway.
2. Console Port Status
Display
Display the console port configuration, like
baudrate, databits, parity, etc.
3. SNMP Community
Setup
Create, modify or delete SNMP
community name, the IP address
associated with the name and the access
right. Up to 5 entries are supported.
4. Trap Receiver Control
Create, modify or delete the community
name, IP address and aging time of the
trap receivers. Up to 5 receivers are
supported.
5. Management
Features Control
Enable or disable web, telnet and SNMP
management function of the switch. You
can also change the http port number on
this menu.
2. Management
Setup
6. Trap Filtering Setup
Define which events will trigger the trap on
this menu.
1. Port Status /
Configuration
Show the status of each ports and
configure each ports settings. It also
allows you to configure each port’s speed,
duplex, flow control and bandwidth
allocation..
2. Address Table
Create, delete and display the MAC
address entries of each port. You can
also modify the aging time and search a
specified MAC address on this menu.
3. VLAN
Two VLAN modes are supported on this
switch, 802.1Q VLAN and port group
VLAN. Please select the VLAN mode
first and then make further configuration.
Please refer to section 4.9 for detail
configuration available on this switch.
4. Security This function is reserved for future use.
3. Device Control
5. IGMP Snooping
Enable or disable the IGMP Sn
ooping.
You can also display the IP multicast
registration table on this menu.