Filter
Top Products
- 38 -
CHAPTER 5 TROUBESHOOTING
This chapter contains information to help you solve problems. If WGSW-2403 is not
functioning properly, make sure the Switch was set up according to instructions in this manual.
The port is connected but the port LED is not lit
Solution:
Check the following items:
1. The switch and the connected device’s power are on or not.
2. The connecting cable is good and with correct type.
3. The cable is firmly seated in its connectors in the switch and in the associated
device.
4. The connecting device, including any network adapter is well installed and
functioning.
Some stations can not talk to other stations located on the other port
Solution:
1. Check the VLAN and PVID settings.
2. The address table may contain older information than of the address table of that
node. Please power down to refresh the address information.