Filter
Top Products
- 25 -
A denominate port can be searched by its given name (Match whole word only).
4.7 Security
This is reserved for future use.
4.8 SNMP
Simple Network Management Protocol (SNMP) is a communication protocol for managing
devices on a network. It is commonly used for network administrators to communicate
with multiple devices (hub, switch, router ……) for configuring and monitoring while
convenient for troubleshooting but no miscellaneous platform consideration.
The built-in SNMP is an agent, which watches the status of it self. The Network
Management Station (A computer attached to network with SNMP management program
well installed) can be used to access it.
Community
A valid entry of Community String and IP Address is for authentication to login to the
SNMP agent for configuration. Moreover, the community capacity can up to 3 sets and
only by the way of specified IP address here will be allowed to access the agent. One
entry consist of IP address “0.0.0.0” will allow the ones who know the community string to
access the agent (with Read-Only access right) without limitation.
To Add a community
1. Input a name as a community string for authentication in the “Community String”
field (ex: administrator).
2. Enter the IP address in the “IP address” field you allow to access from (ex:
192.168.1.22)
3. Click the “Access Mode” combo box and select a authority (Read-Only / Read-Write)
4. Click <<Add button to add this entry.
To Remove a Community
1. Select the community you want to remove from the “Current” list
2. Click Remove>> button to remove it
To Modify a Community