Filter
Top Products
- 14 -
6. Mirror
Enable or disable the mirror function and
choose the sniffer port and monitored port.
7. Statistic Information Show traffic information of each ports.
8. Priority Tag
Define the 802.1p tag mapping and the
service rule. Please refer to section 4.13
for detail.
9. STA
Show the spanning tree algorithm status
and configure its parameters.
10. Port Aggregation
Enable or disable the port aggregation
(port trunking) function on specified ports.
4. User
Authentication
This menu allows you to configure the
password of root, admin and guest
account. Only root account has the right
to enter this menu.
1. System Restart
Restart the switch. Two options are
available: cold start and warm start.
2. Default Factory Reset
Reset the switch back to factory default
settings.
3. Timeout Interval
Setup
Configure the telnet timeout interval.
4. TFTP Download Update the firmware through TFTP server.
5. Local Transfer
Transfer the firmware from master switch
to slave switch.
6. Ping Ping a IP to test the connection status.
5. System Utility
7. Search Location by
Port Name
Input a port name to get the
correspondence of Device ID and Port
number.
6. Save Runtime
Configuration
Save the configuration you have make on
the switch.