Filter
Top Products
- 6 -
100Base-FX
WGSW-D1ST
TXRX
100Base-FX SC multi-mode fiber module
100Base-FX
WGSW-D1S15
TXRX
100Base-FX SC multi-mode fiber module
The auto-negotiation feature of the switch allows each port of the device running at one of
the following operation modes:
Port Media Speed Duplex Mode
Full Duplex 100Mbps fiber optic (Alternative to
copper port-1)
100Mbps
Half Duplex
Full Duplex 10Mbps
Half Duplex
Full Duplex
10/100Mbps
10/100Mbps RJ-45 (copper)
100Mbps
Half Duplex
All copper ports supports MDI/MDI-X automatically crossover capability that is the port
can connect either the PC or hub without crossover cable adjustment.
Wiring for 10/100Mbps (Fiber Optic/Copper)
Following are the summaries of cabling required:
Media Speed Wiring Maximum Distance
10Mbps Category 3,4,5 UTP/STP 100m 10/100Mbps RJ-45
ports
100Mbps
Category 5 UTP/STP 100m
WGSW-D1SC,
WGSW-D1ST
100Mbps
62.5/125 or 50/125µm
multi-mode fiber optic
2km
WGSW-D1S15 100Mbps
9/125µm single-mode fiber optic
15km
If the port is connected but the relevant LED is dark, check the following items:
1. The switch and the connected device’s power are on or not.
2. The connecting cable is good and with correct type.
3. The cable is firmly seated in its connectors in the switch and in the associated
device.