Filter
Top Products
UPS MAINTENANCE
EATON Powerware
®
9125 Two-in-One UPS (2500/3000 VA) User’s Guide S 164201374 Rev D
www.powerware.com
53
How to Replace UPS Internal Batteries
CAUTION
Pull the battery out onto a flat, stable surface. The battery is unsupported when you pull it
out of the UPS.
To replace the UPS internal batteries:
1. Remove the UPS front cover by pulling on both ends (see
Figure 41).
Figure 41. Removing the UPS Front Cover
2. Push down on and unsnap the LED panel (see Figure 42).
3. Disconnect the battery cable from the UPS and cut the battery
cable wire tie.
LED Panel
Battery Cable
Figure 42. Disconnecting the Battery Cable