Filter
Top Products
EATON Powerware
®
9125 Two-in-One UPS (2500/3000 VA) User’s Guide S 164201374 Rev D
www.powerware.com
63
Chapter 9 Troubleshooting
This section explains:
S UPS alarms and conditions
S Howtosilenceanalarm
S Service and support
Audible Alarms and UPS Conditions
The UPS has an audible alarm feature to alert you of potential power
problems. Use Table 11 to determine and resolve the UPS alarms and
conditions.
NOTE Some alarms, such as the Overtemperature and Overload alarms, must be cleared by
shutting down and restarting the UPS (see page 65 for more information).
Flashing
Unlit
Lit
Indicator Legend
Self-Test
Test/Alarm
Reset Button
Battery Service
Site Wiring Fault
Overtemperature
Overload
Figure 46. Alarm Indicators
Silencing an Audible Alarm
Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 11).
To silence the alarm for an existing fault, press the
button. If UPS
status changes, the alarm beeps, overriding the previous alarm silencing.