Filter
Top Products
Chapter 4 System Setup 29
29
To Check the Controller's Voltage Setting:
1. Look at the lower righthand corner on the rear of the Controller. The current voltage
setting (100, 120, 220, or 240 VAC) is displayed on the Power Input Module.
2. If the setting is correct, continue with the installation. If it is not correct, follow the
instructions on page 67 for changing the ST-133 Controller's voltage setting and
fuses.
Mounting the Camera
PI-SCX:1300 This camera head style is available with a tripod adapter option with three
mounting holes (1/4"-20, 3/8"-16, and M6). Figure 8 shows the adapter mounted to the
bottom of the camera.
Figure 8. Mounting Holes on Tripod Adapter