Filter
Top Products
30 PI-SCX System Manual Version 2.E
30
PI-SCX:4300 On the bottom of the camera towards the rear are three threaded holes that
can be used to mount the camera. Two of the holes are M8 × 1.25 tap (25 mmdeep) and
the third one is 1/420 tap (0.5deep). Figure 9 shows the location of the mounting
holes and their distance from the back of the camera.
Figure 9. Mounting Holes on Bottom of Camera
Installing the Application Software
Installation is performed via the
WinView/32 installation process. If
you are installing WinView for the
first time, you should run the
installation before the interface card
is installed in the host computer. On
the Select Components dialog
(see Figure 10), click on the AUTO
PCI button to install the interface
card drivers (the Princeton
Instruments PCI and the USB
drivers) and the most commonly
installed program files. Select the
Custom button if you would like to
choose among the available
program files or do not want to
Figure 10. WinView Installation: Interface Card
Driver Selection
install the PCI driver.
Note: WinView/32 and WinSpec/32 (versions 2.6.0 and higher) do not support the ISA
interface.