Filter
Top Products
User’s Guide • 2–5
Chapter 2 • Detailed Setup
4. After you turn on the projector and computer, if you want to
raise or lower the projected image, just move the mirror
assembly to the appropriate angle.
CAUTION! DO NOT use the assembly cover or projection
mirror as a handle. TO AVOID DAMAGE, YOU MUST
COMPLETELY CLOSE THE PROJECTOR BEFORE
MOVING IT.
If you must move the projector while it is open, grasp it securely
at the sides by the lower part of the housing to support the weight
of the unit.
PROXIMA
Figure 2-6
Moving the projector when open
Using an AV Tripod
On the bottom of the projector there is a connector that you can
connect to a tripod. Use only a heavy-duty, industrial audio-visual
tripod that can support at least 25 pounds.
☞