Filter
Top Products
2–16 • User’s Guide
Chapter 2 • Detailed Setup
AUDIO OUT
All Desktop Projector models contain an internal stereo system
consisting of an amplifier and two speakers. Although this system
provides high quality stereo output, a multimedia presentation
may require connecting the projector to external powered speakers
or an external sound system.
External Speakers
When connecting external speakers, use the optional Proxima
Powered Loudspeaker System (part number A55) or a similar
system. References in the following procedure are to Figure 2-12.
To connect your Desktop Projector to external powered speakers:
1. Insert the mini plug of the stereo cable (supplied with your
powered speakers) into the projector’s AUDIO OUT
connector.
2. Insert the other end of the cable into speaker A.
3. Connect speaker A to speaker B using the cables supplied with
the speaker system.
Note: The projector’s internal speakers can’t be disabled or
turned off.