PSC PT2000 Scanner User Manual


 
Collecting Data
User’s Guide 25
Changing
Program
Titles and
Prompts
PALPRO allows the user to change the title that appears on the menu for
each application, or change the prompts for each application. Change
titles or prompts after selecting an application. To use the application’s
current title and prompts, select
<F4> at the prompt shown at the left.
To change the title or prompts, complete the following steps:
1. Press the <F3> key at the prompt.
Figure 3-12: Changing Prompts Menu
2.
Enter a name for the application (for example, FIXED ASSETS)
followed by the
<ENTER> key. The entered name appears at the
top of the application menu for the current application.
Figure 3-13: Changing the Title
3.
Enter the text for the first prompt (for example, BUILDING ID)
followed by the
<ENTER> key.
Figure 3-14: Entering the First Prompt
4.
Enter the text for the second prompt (for example, ASSET NO.)
followed by the
<ENTER> key.
CHANGE PROMPTS?
F3=YES
F4=NO
¤
ENTER APPL TITLE
¤
FIXED ASSETS
ENTER PROMPT 1
¤
BUILDING ID
PT2000.book Page 25 Thursday, February 26, 2004 9:34 AM