Filter
Top Products
Using Portable File Transfer Program (PTFER)
User’s Guide 77
Figure 5-4: The Communications Settings dialog box
2.
To use a different COM port, select it in the Port options group.
3. Use this dialog box to switch baud rate, the number of stop bits,
and the type of parity. (Use the settings which match the settings
used in the PT2000 or TopGun.)
4. When finished, click on the Connect button to connect to the
port, or select
OK and then use the Connect command in the
menu to make the connection.
Note: When a connection has been made to the serial port, the
Settings option is dimmed on the menu and cannot be
selected. Select
Options > Connect again to disconnect the
application, and then select
Options > Settings again.
PT2000.book Page 77 Thursday, February 26, 2004 9:34 AM