PSC PT2000 Scanner User Manual


 
Using the PT2000 and TopGun with PALPRO
42 PT2000™ & TopGun™
INVMODEM
INVMODEM (Inventory Application with Modem Option ) works
exactly like
INVPRO. However, an additional feature lets you send the
collected data to a computer over a modem.
To use this application, you should have experience with modem
communications. You should know how to set up the modem for your
system and how to use the communications software that runs it. If you
are connecting to a bulletin board system, you should know how to log
into the system.
Using the
Modem
Feature
1. From the application menu, select <F3> for file options.
Figure 3-53: INVMODEM Application Menu
2.
From the File Options menu, select <F2>.
Note: For information about using the application, see page 29.
Note: The modem should be set up for transmission at either 2400
or 9600 baud with no parity, 8 data bits, 1 stop bit, and no
date compression.
INVMODEM uses Xmodem protocol for file
transmissions.
INV W/MODEM
F2=COLLECT
F3=FILE OPTIONS
F4=EXIT
PT2000.book Page 42 Thursday, February 26, 2004 9:34 AM