Q-Logic 3000 Network Card User Manual


 
C–Flash Update
QLogic Adapter Flash Update — Linux
NE0154601-00 A C-11
Here is an example of a Linux nxflash output:
# ./nxflash -i 0 --info
NIC driver will be temporarily unloaded
Closing interfaces: eth2 eth3
PCIE Function Number is 0
Verifying flash...Done.
Board Type : 0x26 (NetXen NX3031 Dual Port SFP+ 10GbE
Server Adapter)
Board Chip Rev : B1
Serial Id : SF8DBK0145
Efuse ID : 0x0000000000000000
Firmware version(on Flash) : 4.0.304
BIOS version : 2.1.0
MAC Addr 0 : 00:0E:1E:00:7C:A4
MAC Addr 1 : 00:0E:1E:00:7C:A5
Subsystem ID : 0x01264040
PXE Status : Enabled
WOL Status : Disabled
Please wait while NetXen drivers are restored...