Filter
Top Products
3–Installation Instructions
Windows Server Driver Installation
NE0154601-00 A 3-3
9. Locate the following files in the driver directory:
nx3fwct.bin
nx3fwmn.bin
nxnd5x86.sys (Windows 2003, 32 bit) or
nxnd5x64.sys (Windows 2003, 64 bit)
Click OK in the Browse for Folder window.
10. Click the Next button from the Hardware Update Wizard window.
To configure the QLogic adapter:
1. On the Start menu, select Control Panel.
2. Select Network Connections.
3. Verify that Ethernet adapter icon says Connected.
4. Assign an IP address to the network interface.
Windows Server 2008
To install the QLogic adapter driver:
1. Open the Start menu.
2. Highlight My Computer, then right-click the mouse button. On the shortcut
menu, select Manage. The Computer Management window opens.
3. Select Device Manager under Computer Management.
4. From the Device Manager window, select scan for new hardware. The
Update Driver Software window opens.
5. Select Browse my computer for driver software, then click Browse.
6. Locate the following files in the driver directory:
nx3fwct.bin
nx3fwmn.bin
nxnd6x86.sys (Windows Server 2008, 32 bit) or
nxnd6x64.sys (Windows Server 2008, 64 bit)
Click OK in the Browse for Folder window.
7. From the Update Driver Software window, click Next.
To configure the QLogic adapter:
1. On the Start menu, select Control Panel.
2. Select Network Connections.
3. Verify that Ethernet adapter icon says Connected.
4. Assign an IP address to the network interface.