Filter
Top Products
4–Hardware Installation
QLE3142 Installation
4-4 NE0154601-00 A
QLE3142 Installation
To install the QLE3142:
1. Verify that the system is powered down and unplug the power cord.
2. Remove the system cover.
3. Locate an empty x8 PCIe slot.
4. Remove the SFP+ optical modules from the QLE3142 if they are already
inserted (see Figure 4-5).
5. Insert the QLE3142 into the x8 PCIe slot. Apply uniform pressure on top of
the QLE3142 until it is firmly seated in the bus connector.
6. Connect the SFP+ module or copper direct attach twinax cable. Listen for an
audible clicking sound when the optical module is inserted into the housing
(see Figure 4-5).
7. Secure the bracket to the chassis and replace the cover.
8. Connect the appropriate cables to the QLE3142.
9. Plug in the power cord and power up the system.
NOTE:
The optical module must be seated correctly in the housing to ensure proper
operation.