Filter
Top Products
11 – Event Log Configuration
Displaying the Event Log
11-2 59183-02 A
S
11.2
Displaying the Event Log
Enter the Show Log command to display the event log. Each message has the
following format:
[ordinal][time_stamp][severity][message_ID][source][message_text]
[ordinal]–A number assigned to each message in sequence since the
last time the alarm history was cleared.
[time_stamp]–The time the alarm was issued in the format
day month hh:mm:ss.ms UTC yyyy. This time stamp comes from the switch
for events that originate with the switch, and from the workstation for events
that originate with Enterprise Fabric Suite 2007.
[severity]–The event severity: A–Alarm, C–Critical, W–Warning,
I–Informative.
[message_ID]–A number that identifies the message using the following
format: category.message_number
[source]–The program module or application that generated the event.
Sources include Zoning, Switch, PortApp, EPort, Management Server.
Alarms do not include the source.
[message_text]–The message text
The following is an example of the Show Log command:
SANbox #> show log
[327][day month date time year][I][Eport Port:0/8][Eport State=
E_A0_GET_DOMAIN_ID]
[328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0]
[329][day month date time year][I][Eport Port: 0/8][Sending init hello]
[330][day month date time year][I][Eport Port: 0/8][Processing EFP, oxid= 0x8]
[331][day month date time year][I][Eport Port: 0/8][Eport State = E_A2_IDLE]
[332][day month date time year][I][Eport Port: 0/8][EFP,WWN= 0x100000c0dd00b845,
len= 0x30]
[333][day month date time year][I][Eport Port: 0/8][Sending LSU oxid=0xc:type=1]
[334][day month date time year][I][Eport Port: 0/8][Send Zone Merge Request]
[335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set]
You can also filter the event log display with the Show Log Display command and
customize the messages that display automatically in the output stream.
Filtering the Event Log Display
Controlling Messages in the Output Stream