Filter
Top Products
7 – Zoning Configuration
Displaying Zoning Database Information
7-2 59183-02 A
S
7.1
Displaying Zoning Database Information
A switch maintains three zoning databases:
Non-volatile–This zoning database is permanent and contains all zone sets,
zones, and aliases that you create and save on a switch. The zone sets in
the non-volatile zoning database are known as configured zone sets.
Volatile–This zoning database is temporary. This means it is not retain
across switch resets. The volatile zoning database can be the working copy
of a zone set being edited or the active zone set received from another
switch. In the latter case, this is also known as the merged zone set.
Active–This zoning database is the active zone set.
You can display the following information about the zoning database:
Configured Zone Set Information
Active Zone Set Information
Merged Zone Set Information
Edited Zone Set Information
Zone Set Membership Information
Orphan Zone Information
Alias and Alias Membership Information
Zoning Modification History
Zoning Database Limits
7.1.1
Configured Zone Set Information
The Zoneset List and the Zoning List commands display information about the all
zone sets in the non-volatile zoning database. Enter the Zoneset List command to
display a list of the zone sets as shown in the following example:
SANbox #> zoneset list
Current List of ZoneSets
------------------------
alpha
beta