Filter
Top Products
12 – Call Home Configuration
Managing the Call Home Database
12-6 59183-02 A
S
Enter the Show Setup Callhome command to display the Call Home service
configuration as shown in the following example.
SANbox (admin) #> show setup callhome
Callhome Information
--------------------
PrimarySMTPServerAddr 0.0.0.0
PrimarySMTPServerPort 25
PrimarySMTPServerEnabled False
SecondarySMTPServerAddr 0.0.0.0
SecondarySMTPServerPort 25
SecondarySMTPServerEnabled False
ContactEmailAddress nobody@localhost.localdomain
PhoneNumber <undefined>
StreetAddress <undefined>
FromEmailAddress nobody@localhost.localdomain
ReplyToEmailAddress nobody@localhost.localdomain
ThrottleDupsEnabled True
+ indicates active SMTP server
12.3
Managing the Call Home Database
To modify the Call Home database, you must open an Admin session with the
Admin Start command. An Admin session prevents other accounts from making
changes at the same time through Telnet, QuickTools, Enterprise Fabric Suite
2007, or another management application. You must also open a Callhome Edit
session with the Callhome Edit command. The Callhome Edit session provides
access to the Profile and Callhome commands with which you make modifications
to the Call Home database.
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome)#> callhome . . .
SANbox (admin-callhome)#> profile . . .
When you are finished making changes, enter the Callhome Save command to
save the changes and close the Callhome Edit session. Changes take effect
immediately.
SANbox (admin-callhome)#> callhome save
To close the Callhome Edit session without saving changes, enter the Callhome
Cancel command.
SANbox (admin-callhome)#> callhome cancel