2 – Command Line Interface Usage
Setting Page Breaks
59183-02 A 2-5
A
2.5
Setting Page Breaks
Some display commands deliver so much information to the screen that it scrolls
off too quickly to read it. You can limit the display to 20 lines by turning on page
breaks. By default, page breaks are turned off.The following is an example of how
to turn page breaks on and how it affects the display.
SANbox #> set pagebreak on
SANbox #> zone list
Zone ZoneSet
---- -------
Zone1
alpha
beta
Zone2
delta
echo
Zone3
sierra
tango
Zone4
gamma
delta
Press any key to continue, 'q' to quit ...
2.6
Creating a Support File
If you contact technical support about a problem with your switch, they may
request that you create and send a support file. This support file contains all of the
switch configuration information which can be helpful in diagnosing the problem.
The Create Support command creates the support file (dump_support.tgz) on the
switch. If your workstation has an FTP server, you can proceed with the command
prompts to send the file from the switch to a remote host. Otherwise, you can use
FTP to download the support file from the switch to your workstation.
NOTE:
Support files are deleted from the switch during a power cycle or switch
reset.