14 – Command Reference
Group
14-34 59183-02 A
S
The following is an example of the Group Edit command:
SANbox #> admin start
SANbox (admin) #> security edit
SANbox (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name g1
Group Type ISL
Group Member 10:00:00:c0:dd:00:90:a3
Authentication (None / Chap) [None] chap
PrimaryHash (MD5 / SHA-1) [MD5 ] sha-1
PrimarySecret (40 hex or 20 ASCII char value) [ ] 12345678901234567890
SecondaryHash (MD5 / SHA-1 / None) [None] md5
SecondarySecret (32 hex or 16 ASCII char value) [ ] 1234567890123456
Binding (domain ID 1-239, 0=None) [3 ]
Finished configuring attributes.
To discard this configuration use the security cancel command.
The following is an example of the Group List command:
SANbox #> group list
Group SecuritySet
----- -----------
group1 (ISL)
alpha
group2 (Port)
alpha
The following is an example of the Group Members command:
SANbox #> group members group_1
Current list of members for Group: group_1
----------------------------------
10:00:00:c0:dd:00:71:ed
10:00:00:c0:dd:00:72:45
10:00:00:c0:dd:00:90:ef
10:00:00:c0:dd:00:b8:b7