Q-Logic 5000 Switch User Manual


 
14 – Command Reference
Set Setup Callhome
59183-02 A 14-95
A
Notes The Callhome service must be active to support Call Home email
notification. Refer to the “Set Setup Services” command on page 14-100.
The primary, secondary, or both SMTP servers must be properly addressed
and enabled on the switch to activate Call Home email notification. If both
SMTP servers are enabled, the primary server is active.
The switch will reroute Call Home email messages to the secondary SMTP
server if the primary should become unavailable. Primary and secondary
identities do not change upon transfer of control.
Callhome profiles determine the events, conditions, and email recipients of
Call Home email messages. Refer to the “Profile” command on page 14-46
for information about creating Call Home profiles.
FromEmailAddress Email address that is defined as the sending
address in the From: field of the email message.
The format is account@domain. This field is
required. Undeliverable messages are returned to
this address unless overridden by the ReplayToE-
mailAddress parameter.
ReplyToEmailAddress Email address that is to receive replies to the out-
going email message. The format is
account@domain. This parameter overrides the
FromEmailAddress parameter.
ThrottleDupsEnabled Enables (True) or disables (False) the throttling of
duplicate email messages in the message queue.
When enabled, duplicate email messages that
enter the queue within 15 seconds of the original
are suppressed. The original message is sent
including a report of the number of suppressed
duplicates.
Table 14-22. Call Home Service Configuration Settings
Entry Description