Filter
Top Products
14 – Command Reference
Set Setup Radius
59183-02 A 14-97
A
Set Setup Radius
Configures RADIUS servers on the switch.
Authority Admin session
Syntax set setup radius
Prompts you in a line-by-line fashion to configure RADIUS servers for user
account and device authentication. Table 14-23 describes the RADIUS server
configuration fields.
NOTE:
This command requires the Fabric Security license key. To purchase a
license key, contact your authorized maintenance provider or authorized
reseller. Use the Feature command to install a license key.
Table 14-23. RADIUS Service Settings
Entry Description
DeviceAuthOrder Authenticator priority for devices:
Local: Authenticate devices using only the local security
database. This is the default.
Radius: Authenticate devices using only the security data-
base on the RADIUS server.
RadiusLocal: Authenticate devices using the RADIUS server
security database first. If the RADIUS server is unavailable,
then use the local switch security database.
UserAuthOrder Authenticator priority for user accounts:
Local: Authenticate users using only the local security data-
base. This is the default.
Radius: Authenticate users using only the security database
on the RADIUS server.
RadiusLocal: Authenticate users using the RADIUS server
security database first. If the RADIUS server is unavailable,
then use the local switch security database.
TotalServers Number of RADIUS servers to configure during this session.
Setting TotalServers to 0 disables all RADIUS authentication.
The default is 0.
ServerIPAddress IP address of the RADIUS server. The default is 10.0.0.1.
ServerUDPPort User Datagram Protocol (UDP) port number on the RADIUS
server. The default is 1812.