Filter
Top Products
14 – Command Reference
Show Switch
59183-02 A 14-155
A
Show Switch
Displays switch operational information.
Authority None
Syntax show switch
Notes Table 14-31 describes the switch operational parameters.
Table 14-31. Switch Operational Parameters
Parameter Description
SymbolicName Descriptive name for the switch
SwitchWWN Switch world wide name
BootVersion PROM boot version
CreditPool Number of port buffer credits available to recipient
ports
DomainID Switch domain ID
FirstPortAddress FC address of switch port 0
FlashSize - MBytes Size of the flash memory in megabytes
LogFilterLevel Event severity level used to record events in the
event log
MaxPorts Number of ports available on the switch
NumberOfSwitchResets Number of times the switch has been reset over its
service life
ReasonForLastReset Action that caused the last reset
ActiveImageVersion - build date Active firmware image version and build date.
PendingImageVersion - build date Firmware image version and build date that is
pending. This image will become active at the next
reset or power cycle.
ActiveConfiguration Name of the switch configuration that is in use.
AdminState Switch administrative state
AdminModeActive Admin session status
Beacon Beacon status as set by the Set Beacon com-
mand.
OperationalState Switch operational state