Filter
Top Products
14 – Command Reference
Set Setup Services
14-102 59183-02 A
S
Examples The following is an example of the Set Setup Services command:
SANbox #> admin start
SANbox (admin) #> set setup services
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
PLEASE NOTE:
-----------
* Further configuration may be required after enabling a service.
* If services are disabled, the connection to the switch may be lost.
* When enabling SSL, please verify that the date/time settings
on this switch and the workstation from where the SSL connection
will be started match, and then a new certificate may need to be
created to ensure a secure connection to this switch.
TelnetEnabled (True / False) [True ]
SSHEnabled (True / False) [False]
GUIMgmtEnabled (True / False) [True ]
SSLEnabled (True / False) [False]
EmbeddedGUIEnabled (True / False) [True ]
SNMPEnabled (True / False) [True ]
NTPEnabled (True / False) [False]
CIMEnabled (True / False) [False]
FTPEnabled (True / False) [True ]
MgmtServerEnabled (True / False) [True ]
CallHomeEnabled (True / False) [True ]
Do you want to save and activate this services setup? (y/n): [n]
MgmtServerEnabled Enables (True) or disables (False) the management of the
switch through third-party applications that use GS-3 Man-
agement Server (MS). This parameter is the master control
for the Set Config Port command parameter, MSEnable. The
default is True.
CallHomeEnabled Enables (True) or disables (False) the Call Home service
which controls email notification. The default is True.
Table 14-24. Switch Services Settings (Continued)
Entry Description