Filter
Top Products
14 – Command Reference
Test Status
14-168 59183-02 A
S
Test Status
Displays the status of a test in progress, or if there is no test in progress, the
status of the test that was executed last.
Authority None
Syntax test status
port [port_number]
Keywords port [port_number]
Display test status for the port given by [port_number]. [port_number] can be
0–19.
Examples The following is an example of the Test Status Port command:
SANbox (admin) #> test status port 1
Port Test Test Loop Test
Num Port Type Status Count Failures
---- -------- ---- ------ ----- --------
1 1 Offline Internal Passed 12 0