Filter
Top Products
LVD/SE
AUXPWR
SERL
A
PCBA NO. 501447- = Executive IV
SE/LVD
AUXPWR
SERIAL
PCBA NO. 501387- = Executive III
Figure 4-8 Executive PCBA Identification
10. Make sure that the Red edge of the ribbon cable faces to the right side when the
cable is installed. Connect the SERIAL ribbon cable to the SERIAL connector on
Executive III PCBA’s or to the SERLA connector on Executive IV PCBA’s. Route
the SERIAL cable under the AUXPWR cable as shown in Figure 4-7 and connect
it to the SERIAL connector on the FCO (Figure 4-9).
SERIAL Connector
on Executive PCBA
SERIAL Connector on
Fibre Channel Option
SERIAL Ribbon Cable
Note: Red edge faces right.
A
UXPWR Connector
on Executive PCBA
AUXPWR Connector on
Fibre Channel Option
AUXPWR Cable
Figure 4-9 Detail of AUXPWR and SERIAL Connections (Executive III PCBA Shown)
501440 Rev. G FCO Type A Installation 4-7