Filter
Top Products
FCO Type B Installation
5. FCO Type B Installation
5-1
5.1 Fibre Channel Option (FCO) Type B Installation Considerations
5.1.1 Operating Environment
A TLS with the Fibre Channel Option is designed to operate in an ambient environ-
ment from 41
o
F to 95
o
F (5
o
C to 35
o
C), 20% to 80% relative humidity, and at altitudes
from -1000 to +10,000 feet. Moisture must not be allowed to condense inside the sys-
tem.
5.1.2 Ventilation
When selecting a location for the TLS, be sure to provide sufficient space behind the
unit to allow for cable connections. Also, be sure nothing will block the air intake at
the inlet air filters or the top air vent slots.
5.2 FCO Type B Interconnect Cabling
The Type B Fibre Channel Option bridge/router is factory installed on the top of TLS-
412xxx, TLS-58xxx, TLS-68xxx and TLS-88xxx libraries. All the bridge/router inter-
connect and power cables are accessed at the rear of the unit.
AC Power Receptacle
Power Switch
SCSI 0SCSI 4SCSI 2
SCSI 1SCSI 5SCSI 3
SERIAL
FAIL OVER
ETHERNET
FIBRE CHANNEL 0
FIBRE CHANNEL 1
SCSI 0
LED
SCSI 4
LED
SCSI 2
LED
SCSI 1
LED
SCSI 5
LED
SCSI 3
LED
AT LED 1
(Fibre Channel 1)
LK LED 1
(Fibre Channel 1)
AT LED 0
(Fibre Channel 0)
LK LED 0
(Fibre Channel 0)
ST LED
(Ethernet)
LK LED
(Ethernet)
ST LED
FT LED
Figure 5-1 Rear View of the Type B Fibre Channel Bridge/Router (FCO)
501440 Rev. G