Qualstar 501440 Rev. G Network Card User Manual


 
1. Introduction
1.1 Who Should Read This Manual
This manual covers the TLS Fibre Channel Option (FCO) and is written for the in-
stalling technician and the user/operator.
For information about the operation of various libraries, SCSI interface, or other in-
formation outside the scope of this manual, please refer to the appropriate documents
listed below.
Subject
Document
Qualstar
Document
Number
TLS-4000 SCSI-2 Interface Manual 500523 SCSI Command Information
TLS-5000/6000/8000 SCSI-2 Interface Manual 501205
TLS-4000 Installation and Operation Manual 501370
TLS-412xxx Installation and Operation Manual 501300
Installation and Operation
TLS-5000/6000/8000 Installation and Operation Manual 501450
TLS-4000 Technical Service Manual 501380
TLS-412xxx Technical Service Manual 501290
Service
TLS-5000/6000/8000 Technical Service Manual 501090
TLS-4000 Product Specification 500563
TLS-412xxx Product Specification 500119
TLS-5000 Product Specification 501561
TLS-6000 Product Specification 501080
Specifications
TLS-8000 Product Specification 501498
Supported Tape Drives Product Information Note PIN-014
Approved Data Cartridges Product Information Note PIN-038
SCSI-2 Specifications ANSI Document X3.131-1994 N/A
SCSI SPI-2 Specifications ANSI Document X3.302-1998 N/A
Table 1-1 Applicable Documents
501440 Rev. G Introduction 1-1