Filter
Top Products
Small side of “D” connector facing you
when oriented correctly for insertion.
Figure 4-11 End View of “D” Connector on GBIC Adapter
16. Prepare to insert the appropriate GBIC (gigabit interface converter) adapter into
the FCO. Note that the GBIC adapter is keyed and the small side of the “D” con-
nector is facing you when oriented correctly. See Figure 4-11. Locate the rectan-
gular opening in the bottom of the Fibre Channel Option and insert the GBIC
adapter, “D” connector end first. Then carefully guide the GBIC adapter into the
FCO until it clicks into place. Refer to Figure 4-12.
Rectangular opening in bottom
of Fibre Channel Option.
GBIC adapter fully inserted
into Fibre Channel Option.
Figure 4-12 Inserting GBIC Adapter into Fibre Channel Option
4.4 Initializing the Fibre Channel Option
After physically installing the Fibre Channel Option onto the library, disconnect (if
connected) the Fibre Channel Option from the FC host or Hub to avoid affecting any
operational systems.
NOTE
Refer to the applicable TLS Installation and Operation manual for instructions on using the TLS
Library and its menus.
501440 Rev. G 4-10 FCO Type A Installation