Filter
Top Products
CAUTION
SCSI Bus ribbon cables are fragile and can be damaged by pulling on the cable in-
stead of the pull-tab provided at each connector.
Steps 5 through 8 only apply to type A Fibre Channel Options.
5. Carefully disconnect the SCSI Bus ribbon cable (labeled CH0) from the CH0 con-
nector on the Fibre Channel Option. See Figure 9-3.
CH2 Connector
CH1 Connector
CH0 Connector
Figure 9-3 Channel Connections in Type A FCO
6. Carefully disconnect the SCSI Bus ribbon cable (labeled CH1) from the CH1 con-
nector on the FCO and then disconnect the last ribbon cable from the CH2 con-
nector (if present). See Figure 9-3.
501440 Rev. G Repacking 9-3