Filter
Top Products
Calibration 41
Boat show mode
CAUTION:
Do NOT enable this mode. It must only be used for demonstration
purposes.
Ensure that the Boatshow Mode Use is set to OFF. If necessary, use the
tripor reset key to achieve this.
Factory defaults
You can use this screen to reset the operating parameters to the factory
default values. If you want to apply the factory defaults, ensure the
displayshowsYES, but if you want to retain the values you have set up,
ensurethat the display shows NO.Usethe
tripandreset keystomakethe
required selection.
The values you have selected will be applied when you exit this screen.
Leaving Dealer calibration
Holddownthedepthand speedkeys for2 secondstosaveyoursettings,
exit Dealer calibration and resume normal operation.
81040_1.book Page 41 Thursday, November 7, 2002 10:21 AM