Filter
Top Products
5 SpeedTouch™ Web Interface
E-DOC-CTC-20040123-0001 v3.0
55
Wireless The SpeedTouch™ Wireless page offers three tabs to configure the SpeedTouch™580
wireless module:
• Access point settings
To configure the basic settings of the SpeedTouch™580 wireless access point.
• Security
To overview and control the security settings and wireless client access to the
SpeedTouch™580’s wireless network segment.
• Associated stations
To overview the SpeedTouch™580 wireless associated stations.
Access point settings Select Access Point Settings to view the Access Point Settings page:
By default the SpeedTouch™ broadcasts its Network Name (SSID) to the WLAN
clients. WLAN clients using this broadcast SSID or using an empty SSID can join the
SpeedTouch™ WLAN.
• To enhance the security of your connection, it is possible to select “only stations
with the correct Network name (SSID) can connect”.
Note When you enable this option, the SSID will not be broadcast.
Depending on your wireless client, the SpeedTouch™ wireless
network will no longer be visible in the list of available networks.
Moreover, stations trying to associate with an empty SSID will not be
able to connect. Click Save all to save your changes to persistent
memory.
• It is possible to personalise the Network Name (SSID). Proceed as follows:
1 Enter the SSID of your choice in the Network name (SSID) field.
Note The SSID must consist of maximum 32 alphanumeric characters.
2 Click Apply to apply the SSID.
3 Reconfigure your wireless client(s) to use the changed settings.
4 Click Save all to save your changes to persistent memory.