Filter
Top Products
5 SpeedTouch™ Web Interface
E-DOC-CTC-20040123-0001 v3.0
59
To enable level 2 - WPA-PSK
1 Select the entry Security level 2 - WPA-PSK which allows you to pro-
ceed with the following window:
2 Define your passphrase.
Note The passphrase must consist of 8 to 64 ASCII characters.
3 Select an encryption method.
Note TKIP is the encryption as specified in the WPA standard. It is
designed to be implemented by a firmware upgrade on legacy
hardware. AES encryption offers stronger security, but is not
part of the WPA -although it will become part of the future
standard -WPA2.
4 Optionally, change the rekeying interval.
Note The security keys used by each associated station are periodically
changed for greater security. The interval between key refresh
can be set to an integer number of seconds. If set to 0, the keys
are not refreshed.
5 Click Apply to apply the WPA-PSK settings.
Note The colour of the WLAN LED will change to green.
6 Reconfigure your wireless client(s) to use the changed settings.
7 Click Save all to save your changes to persistent memory.