Filter
Top Products
( 28 / 64 )
(3) Replacing the Oscillator Circuit Boards
Figure 3.7 shows how to replace the oscillator circuit boards. For the position of the oscillator circuit
board, see "Figure 2.2 Internal view of the emulation pod" (page 18).
Figure 3.7 Replacing the oscillator circuit boards
(3) Attach the J1 connector of another oscillator circuit board
for replacement to the J1 (OSCIN3) or J2 (XIN) connector
of the base board.
(4) Secure the oscillator circuit board with the screw.
(1) Unscrew the screw securing the oscillator circuit board.
(2) Lift off the oscillator circuit board.