Filter
Top Products
( 4 / 64 )
Terminology
Some specific words used in this user's manual are defined as follows:
Emulator system
This means an emulator system built around the PC4701 emulator. The PC4701 emulator system is
configured with an emulator main unit, emulation pod, host machine and emulator debugger.
Emulator main unit (Hereafter PC4701)
This means the emulator main units for 8 and 16-bit MCUs. For details on PC4701, visit Renesas Tool
Homepage at http://www.renesas.com/eng/products/mpumcu/toolhp/
Emulation pod main unit
This means the M37760T-RPD-E (this product). This emulation pod is for the 7770 Series 7760
Group 7760/7762/776A of the 7700 Family MCUs.
Host machine
This means a personal computer used to control the emulator and emulation pod.
Emulator debugger
This means a software tool M3T-PD77 V. 4.00 Release 1 or later to control the emulator from the
host machine through an interface.
Firmware
Program that analyzes contents of communication with the emulator debugger and controls the
emulator hardware. This program is installed in the EEPROM. This program is downloadable from
the emulator debugger to upgrade the firmware or to support other MCUs.
Evaluation MCU
This means the microcomputer mounted on the emulation pod which is operated in the specific mode
for tools.
Target MCU
This means the microcomputer you are going to debug.
Target system
This means a user's application system using the MCU to be debugged.
*
In this user's manual, this symbol is used to show active LOW. (e.g. RESET*: Reset signal)