Filter
Top Products
( 31 / 64 )
CAUTION
Notes on Connecting the Target System:
1.Always shut OFF power before connecting the target system. The power ON state
could destroy internal circuits.
2.The small connectors of the FLX100 and M3T-FLX-100LCC are guaranteed for
only 20 insertion/removal iterations.
3.Take care not to attach the converter board in a wrong direction. It may cause a fatal
damage to the emulation pod.
3.5 Connecting the Target System
There are four ways available to connect the emulation pod to target system as shown in Figure 3.10.
Figure 3.10 Connecting emulation pod and target system
*1 These three items are available in one package.
*2 M3T-FLX-100LCC is included in this emulation pod package.
*3 To purchase IC socket IC61-1004-051 (manual soldering type), contact your local distributor or
Yamaichi Electronics Co., Ltd.
* To purchase M3T-FLX100-T, M3T-FLX100-R, M3T-DUMMY100S and M3T-DIRECT100S,
contact your local distributor.